Follow the below steps to boost your Wi-Fi Network
.:
1. Empty a Beer can obliviously
after drinking that and than you have to make sure that its washed thoroughly
so that there is no smell or anything left by that liquid Beer, because if
anything's is left than it will be a problem and smell will be there in your
whole room.
2. Now after washing that Beer Can
thoroughly you have to remove that small can opening piece you can see that in
the image on the right hand side.
3. Now after you have removed the
small can opening piece you can to cut the can in the round diameter like in
the image on the right hand side, we are doing this because we have to open
that can and make a shape like small antenna.
4. So now you have to repeat the
same step on the other corner but this time you have to leave small space
between the cuts so that the can remains attached to the bottom and we will
have a look of antenna for our modem - router for boosting purpose. So remember
this step is really important to follow else your antenna will not look like
how it should be.
5. So now the main steps are
completed, now you have to cut the can vertically from between like in the
image on the right hand side. and your antenna will take looks like how it
should be and now you only have to attach this antenna to your modem so that we
can se its effect.
6. Now last step is too attach this
antenna to your modem - router, you can use any adhesive or M-Seal which has
really a good hold, so in this step you can change directions of your antenna
suiting your will, like in which direction you want it too boost the signal.
7. Now your antenna is ready for
boosting purpose and it will look something like below you can check the image
below.
No comments:
Post a Comment